Litedeer LiteStar Smart Electric Fireplace Insert
The Litedeer LiteStar is a smart electric fireplace insert for traditional openings and custom surrounds. The current 2026 lineup is consolidated here in 30-, 32-, 35-, and 38-inch models.
At a Glance
| Fireplace type | Electric Fireplace Insert |
| Installation | Built-in insert installation |
| Available sizes | 30-inch, 32-inch, 35-inch, 38-inch |
| Controls | Remote and smart app control |
Good Fit If
- You want a taller, traditional fireplace proportion.
- You are filling an existing opening or building a custom surround.
- You want smart app and remote control.
Not Ideal If
- You want an ultra-wide linear fireplace.
- You need a gas or wood-burning insert.
Key Features
- Traditional insert proportions
- Smart app and remote control
- Multi-color flame presentation with crackling sound
- Four current sizes on one family page
Installation and Fit
Compare the exact model’s product and opening dimensions before selecting a surround. The 30- and 38-inch models differ from the 32-/35-inch manual drawings. The ZEF32X depth and the manual’s electrical-current figure need model-specific confirmation. Have the installer use the rating label and current instructions for the supplied unit, including trim allowances, clearances and circuit requirements.
What’s Included
Fireplace, remote control, decorative media supplied for this series, and manufacturer documentation when available. Confirm framing, electrical, ventilation, and clearance requirements before installation.
Product Specifications
| Brand | Litedeer |
| Series | LiteStar |
| Product category | Electric Fireplace Insert |
| Available models | 30-inch, 32-inch, 35-inch, 38-inch |
| 30-inch — ZEF38VC-30 | 30 7/8 × 22 1/4 × 8 in. overall (W × H × D); not a framing opening. |
| 32-inch — ZEF32X | Front: 32 × 24 in. (W × H). The linked ZEF32X manual drawing labels a 9 1/2 in. depth, while the previous listing stated 10 in.; confirm the exact supplied revision and trim allowance before framing. |
| 35-inch — ZEF35X | 35 × 30 × 10 in. overall (W × H × D); not a framing opening. |
| 38-inch — ZEF38VC | 38 × 26 × 8 in. overall (W × H × D); not a framing opening. |
| 30-inch electrical — ZEF38VC-30 | 120V; 1,500W high setting, approximately 12.5A calculated. Current manufacturer page supports plug-in or hardwire installation; obtain the model-specific low-setting and circuit requirements. |
| 32-/35-inch electrical — ZEF32X / ZEF35X | 120V / 60Hz; 750W / 1,500W; plug-in or hardwire per the manual. Its specification table states 12A, while 1,500W ÷ 120V is 12.5A; confirm the rating label and circuit requirement with the manufacturer. |
| 38-inch electrical — ZEF38VC | 120V / 12.5A; 750W / 1,500W, per the current manufacturer product page. |
| Manual coverage | The linked dimensional drawings cover ZEF32X and ZEF35X. Use the instructions for the exact ZEF38VC-30 or ZEF38VC model for those sizes; do not substitute the 32-/35-inch framing dimensions. |
Common Questions
Can the flame effect be used independently?
Yes. The flame and sound effects can be enjoyed independently of heat.
How should I choose a size?
Use the listed overall dimensions for planning, then verify the current manufacturer installation instructions before framing or ordering finish materials.
Does it include smart control?
Yes. This series supports smart app control in addition to the included remote.
Do all sizes have the same electrical requirements?
The verified sources specify 120V and up to 1,500W, but the documentation differs by model. ZEF32X and ZEF35X have a 12A figure in the manual that conflicts with a 12.5A calculation at 1,500W; confirm the rating label and required circuit. Use the exact model’s installation instructions rather than assuming the same circuit specification for every size.
How much does it cost to run?
At an illustrative rate of $0.20/kWh, 1,500W of continuous heating costs about $0.30 per hour. Where the documented 750W setting applies, it costs about $0.15 per hour. Multiply power in kW by runtime and your electricity rate. Flame-only use consumes less; a verified flame-only wattage is not listed here.
Guides and Manuals
Specifications and installation guidance on this page are based on current manufacturer manuals, specification sheets, and product documentation linked below. Confirm final framing and electrical requirements in the model-specific manual.
Related Buying Guides
- How to Choose an Electric Fireplace Size
- Built-In vs. Wall-Mounted Electric Fireplaces
- Electric Fireplace Installation Costs
Related Collections
Why Buy from Very Good Fireplaces?
We help you compare the right fireplace for your room, installation plan, and design goals. If you are unsure which model fits, our team can help narrow the options before you order.
