The Dynasty Cascade Series is a smart linear electric fireplace with a clean flush-mount format, front-facing heat, customizable multicolor flames, and app or remote operation. It is available in 52", 64", 74", and 82" models and includes both crystals and logs.
Cascade is suited to renovations and new construction where a streamlined wall installation and optional zone heat are priorities.
At a Glance
| Best for | Renovations, new construction, apartments, condos, restaurants, and lounges |
| Installation | Flush-mount linear installation |
| Available sizes | 52", 64", 74", and 82" — height (20 1/4") and depth (6 1/2") consistent, only width changes |
| Power | 120V, 1,500W max / 750W min, 12A — consistent across all sizes per manufacturer |
| Heat output | 5,000 BTU on high, approx. 400 sq ft |
| Controls | Dynasty app, compatible smart assistants, and included remote |
| Flame colors | Blue, red, and yellow with color mixing and intensity control |
| Included media | Crystal set and log set |
Good Fit If
- You want a clean, flush-mounted linear fireplace.
- You want app, smart-assistant, and remote operation.
- You want flame effects with or without heat.
- You need a vent-free unit that is serviceable from the front.
Not Ideal If
- You need a recessed or built-in installation (Cascade is flush-mount only).
- You want a compact fireplace under 52 inches.
- You need multi-sided or corner viewing.
Key Features
- Customizable flame: Adjust blue, red, and yellow flame colors, intensity, and mixed-color effects.
- Front-facing heater: High, low, and timer controls provide optional supplemental heat.
- Smart control: Operate the fireplace through the Dynasty app, compatible assistants, or remote.
- Year-round display: Run the flames independently from the heater.
- Installation flexibility: No venting is needed; push-in flush-mount with no clearance requirement.
- Safety: Includes overheat protection and automatic shut-off.
Installation and Fit
Fireplace height (20 1/4") and depth (6 1/2") are consistent across all four widths — only width changes. Framing opening is approximately 3 3/4" narrower, 3/4" shorter, and 1/2" shallower than the unit, at roughly 6" deep. Power is 120V, 12A, up to 1,500W max / 750W min, consistent across all four sizes per the manufacturer's own installation manual. This is a push-in flush-mount installation with no clearance requirement.
What’s Included
Fireplace, remote control, decorative media supplied for this series, and manufacturer documentation when available. Confirm framing, electrical, ventilation, and clearance requirements before installation.
Product Specifications
| Brand | Dynasty Fireplaces |
| Series | Cascade |
| Product category | Smart linear electric fireplace |
| Models | DY-BTX52, DY-BTX64, DY-BTX74, DY-BTX82 |
| Fireplace height / depth | 20 1/4" H x 6 1/2" D (consistent across sizes) |
| Voltage | 120V AC, 60Hz |
| Max power | 1,500W max / 750W min |
| Amperage | 12A |
| Heat output | 5,000 BTU (high) |
| Heating area | Approx. 400 sq ft |
| Viewing configuration | Single-sided |
| Controls | App, smart assistants, and remote |
| Media | Crystal set and log set included |
| Venting | Not required |
Common Questions
Can the Cascade flames run without heat?
Yes. Flame effects can operate independently from the heater.
Does the Cascade require venting?
No. It is an electric fireplace and does not require venting.
What media is included?
Crystal and log media sets are included.
Guides and Manuals
Confirm final framing and electrical requirements in the model-specific guide.
Related Buying Guides
- 5 Best Linear Electric Fireplaces for Your Home
- Electric Fireplace Sizes Explained: 26 to 120 Inches
- How Much Does an Electric Fireplace Installation Cost?
Related Collections
Why Buy From Very Good Fireplaces?
- Authorized-dealer product guidance
- Help comparing size, installation type, and fit
- Support using verified manufacturer information
Need help choosing the right fireplace for your space?
